Monday, November 30, 2015

More Precise Rotations

I was animating my Aclysm and Astrophe side-project and having trouble with a head rotation. I had created the character from a 3/4 angle and hadn't done a full rotation because I didn't anticipate doing too much animation; in my head they were just talking and not moving. When I got into the project, this worked for the depressed, lethargic, Astrophe character, but Aclysm is more wiry and energetic and having him not evoke that with body and head movements wasn't going to work for him. I tried doing it on the fly in Toon Boom, but it wasn't looking right; specifically, the head looked like it was being squeezed instead of rotating. It became clear to me that it would be worthwhile to do a full head rotation with a front, side, back, and 3/4 front and back.

Since I already had a 3/4 view, I started with the side and front, but when I finished them, the volumes from the front didn't seem consistent with the 3/4. The center line looked off. I was estimating and eyeballing where parts needed to be and I wasn't happy with that estimation. I thought if I did a top view it might help me to better visualize how the parts of the face related to the front and side. When I finished though, I realized I could precisely determine where parts would be in a 3/4 turn by simply rotating my top view 3/4 then cross referencing that with the side and front views. It was especially helpful in determining how much something would shrink as it got farther away from a viewer.

I applied this trick. Then I realized that I could cross reference a rotated side view with a front view to make a more precise top view. I went back and did that (luckily, it didn't change the 3/4 I had already done). I further applied this trick to an upward 3/4 as well. A common trick for creating back and back 3/4 views is to silhouette the front and 3/4 views respectively and I've done that below.

My rough designs, drawing through the character:


My final, inked results with angles explained:

This character is supposed to be a scraggly, wiry character and I wanted to reflect that somewhat in the design elements. You may notice things don't line up exactly at every single point. That's because either it was a design choice in that I wanted to avoid a tangent or liked the asymmetry of matching elements; I have imperfect strokes and the width varied (again, I like this for the character); or because I was subconsciously making excuses for not fixing minor things.Given that points match up better than I could do without using this method, I'm okay with minor imperfections and I'm confident that they'll never be an issue in a 2D animation or 3D model.

By starting with a front view, then lining a side view up with it, I can extrapolate most of the other angles I need by lining them up with other, sometimes rotated, angles.

Friday, November 27, 2015

Faux-Faux Gradients

File this under stealing like an artist. My infant daughter gets fussy when it's time to eat, but without pressuring her to eat, she won't gain weight. My wife and I discovered that if we play preschool learning videos for her on our cellphones, the animations distract her enough that she'll seemingly eat without thinking about it. We generally play the same videos over and over so it gives me a lot of time to study the animations. Today I was watching what seemed to be textured gradient backgrounds and was inspired to create the following imitation:
Two art obsessions of mine are creating things that look good quickly and creating things that look good entirely in vector when possible. The image above allowed me to do both. I created two simple gradients, one for the grass and one for the sky each with 5 colors; the grass is linear, the sky radial. I then drew 5 lines on the grass near where each of the 5 colors I chose landed. I matched each line's stroke color to the color in the gradient. I then applied built-in Adobe brushes from the Artistic-Charcoal-Pencil brush library. I repositioned and resized the lines to suit my taste; in this case, I wanted it to blend in with either the lighter or darker color just enough to where the texture of the line could start to be visible. I repeated this process with the sky gradient except that I used my own scatter brush and drew ellipses instead of lines.


To better show the process, I've included the image above of my art board without the cropping. The plain gradients are shown to the left and I overlapped the strokes over the artboard. This whole process could be done in a few minutes and gives me a great foundation for a background. Since it's vector, I can resize the art as large as I want without pixelation which comes in handy in animation programs like Harmony and Flash.

Wednesday, July 29, 2015

New Art and Intellectual Property

Added two new character designs to my gallery. On a lark, I thought it'd be funny to make two cats named Astrophe and Aclysm (i.e.: cataclysm and catastrophe if you're slow) known for having bad luck or causing bad things to happen. I designed them and thought I could make a quick Flash short with them. I'm waiting on my friend, Jon Young, to come over to help me on the audio for it. Thought I could do audio on my own, but discovered I'm clueless about using my compressor/expander, so nope. The second piece is my attempt to make the Ninja Turtles look more like real tortoises. I did that a few months back and didn't get around to posting it. I'm also working on a character called "Psycho Billy" a ghoulish 1950's-Elvis-looking guy, so check back for that.

I noticed I put a copyright logo on the Ninja Turtles piece. I can't copyright that shit. What the hell was I thinking? I'm pretty sure I don't own the Ninja Turtles. That was dumb of me. Since I designed that piece, my attitudes about copyrights have changed anyway. I released Astophe and Aclysm under a Creative Commons Share-Alike (CC BY-SA) license and I plan to do that with any writing and art I do going forward which I intend to keep the rights to. I suspect studios won't buy pieces with that license, so I may not do that for all. I'm still figuring that out.

My attitude on copyright changed for two reasons: One was the arguments against intellectual property, the other was self-promotion. Reading some pieces (i.e.: one piece) by Stephan Kinsella, I was convinced the arguments for intellectual property don't make sense: Information is not scarce, IP intentionally creates a monopoly backed up by the force of law, information can't be possessed as a tangible item, IP requires a central repository to "prove" who owns the information, and IP is the only "property" whose rights expire with time. It's no surprise that over the years, media companies successfully lobbied the U.S. Congress to extend that time, which started at 14 years in 1790 and became (essentially) 120 years by 1998.

As for the second reason, my work isn't being seen as much as I liked, so it didn't make sense to me to limit how it could be shared. It occurred to me that public domain books are repeatedly re-imagined; Sherlock Holmes, Frankenstein, Dracula, and Shakespeare's works are regularly made into films and television shows every few years and those characters often appear in derivative works. The art lives on and is exposed to new generations in perpetuity. Compare this to other classics that are copyrighted; certainly it's not impossible to remake them too, and it may not be even difficult for experienced studios with savvy legal teams if the studio thinks it's worth it, but it can't be denied that the legal meandering is an extra burden. On top of that, an overly protective copyright holder can exercise unwanted creative input.

I jokingly tweeted the other day that I would write the sequel promised in the end credits of the 30 year old movie Buckaroo Banzai Across the 8th Dimension myself. I was curious who owned the rights and did a little digging (i.e.: I spent about 10 minutes reading Wikipedia and Google) and according to an article interviewing writer-director W.D. Richter, MGM owns the rights, but David Begelman, who ran the film's original production company, was known for double dealing. Assuming MGM even wanted to relaunch the franchise, their legal team is concerned they'd invest all this money into it then discover that Begelman sold international rights to someone else. Thus, a cult classic and piece of intellectual property intangibly rests in the filings of a company afraid to do anything with it. It'll probably fade into obscurity as the people who appreciated it die off. When I think about why I got into art, it was because I wanted to leave a mark on the world with my ideas, spark the imagination of kids and kids-at-heart in the same way I was, take a person out of their world momentarily and into mine thus expanding the human experience. It wasn't to have something I worked hard on die off in a legal stalemate.

What about the money? I think if I'm clever enough, I can still make money. For example, a comic I am writing can be sold as limited run paper versions (since people actually collect comics) and free digital downloads for those who miss out. The price and quantity of the limited run would be determined by how much me, the other artists, printers, want and distribution costs involved. Unlike other indy titles, other people could contribute to its promotion by making their own derivative works without requiring my permission.

Tuesday, June 16, 2015

Blog Shout Outs

Last night, Emery Emery promoted this blog on the Skeptically Yours podcast. Great! Now I have to start updating it more! Actually, I looked at the stats and I didn't get any additional views. Maybe when the show becomes available for download.

On the show, one of the guests scoffed at the idea of additional cost for GMO labeling. Emery retorted something to the effect that this guest was right, fuck these corporations. Maybe it was sarcastic, maybe not. My retort during the break was that, even if you hate these corporations, and I don't hate any business based on its wealth, but even if you did, additional regulations here and there add up. One day you wake up and realize that it costs a ton of money to start a business in your country.

It happens.

Saturday, February 14, 2015

Been Busy!

I don't like my blog having such an old post as the highest post and I just put this URL on some resumes I sent out, so it's time for an update!

Lots of family members were in very bad health over the past few months, so I've been in hospitals often.

I started working at E&H Studios since my last post helping out at Ardent Atheist and Skeptically Yours with Emery Emery and Heather Henderson. They're both super nice people, and it's a blast being in studio for their hilarious shows. This is a real treat for me starting as a fan and I look forward to it every week.

I'm likely going to be an executive producer on a documentary film I'm really excited about.

I've been taking classes at UCLA in their Television Writing program. I've been learning a lot and meeting some great industry veterans as well as aspiring writers and producers. I've completed (although it needs punch-up) a spec script for HBO's Silicon Valley and starting on a spec episode of Fox's Gotham. As soon as they're complete and changes are registered with the WGA, I'll share them online. I'm really proud of the stories I came up with on both. The Silicon Valley spec I will be entering into Nickelodeon's writing fellowship which means I have to make any changes to it before the end of the month. After that, there are a few more fellowships to apply to with the big six studios throughout the year.

I'm also putting final touches on a feature script I wrote called DeathWorld. This is coming along really well and I'm really happy about the positive feedback I've been getting on what I've shown so far.

Had to quit taking classes at the Animation Academy for the time being, which is a little sad because I liked the progress I was making, the teacher is great, and it's fun to see the students (many of whom are in High School) coming out of their shell and learning the craft. I made a conscious choice though to focus on writing only for the time being, but I plan on going back after I'm done at UCLA.

That's all for now.

Thursday, May 1, 2014

Find me on Twitter

Haven't been updating this blog lately, but that doesn't mean I haven't been blogging.... I've been doing it in micro-form! Check out my twitter feed! If you're into the same stuff as me, let's follow each other! twitter.com/ryanmagnon

Wednesday, April 2, 2014

Lots of Sketches!

I've been busy with drawing. I've started taking classes in character design at the Silver Design Academy along with my classes at the Animation Academy. Doing both at the same time is great. I'm getting double the feedback. The place is really neat. Here's some photos!
Stephen's life art along with Norman Rockwell prints.

Tales from the Crypt cover art! Looks to be original.

I have new sketches! To start off, I wanted to show a new sketch of an old concept I had for the main character in Totally Awesome Dude applying some techniques I learned at the Animation Academy, Silver Design Academy, and the Animation Design Center, who I've not mentioned yet because I took classes there before starting this blog, but I definitely wanted to give a shout out to Andres Alvarez, who runs the courses.



While I see a lot of improvement in my drawing and design skills, this isn't the style I'm going for. Nonetheless, it was fun to try the style out anyway. I noticed after my second pass that the feet are way too small too and, as you can see, I kept going over it to push it out to try and balance the top-heaviness of the whole drawing. At that point, I remembered all three of my instructors telling me to try making thumbnail drawings and I decided to try that, so I'll share that in my next blog.

After the head concepts I made last time, I had to pick one to do a rotation for. I decided on the Bride of Frankenstein.


Next I did some fully body concepts for the characters I designed before. I wanted to try various body sizes for them. In hindsight, I would've like to have tried giving the Frankenstien a bigger body and smaller head for fun... I would've had one with an undersized body, one with a normal body and one with a undersized body.


Charles wanted to see my characters focus on shape more and exaggerate the shapes a little more so I made these two..


I got positive feedback on them, so I used one for my next assignment, a full body rotation.


At the Silver Academy, I had some free time before the class started so I did this character. I was thinking of straight versus curved lines. In particular, I wanted to put straight lines in unusual places. 


One of our exercises was to make a character inspired by a shape given, here's what I came up with!


Did some other great exercises at both classes, but I'm not going to share! I didn't want to reveal too much about the classes for one, and second, they're not as interesting without the instruction that goes with them. Until next time!

Monday, March 17, 2014

Sketch Daily 1 - Leprechaun

My first time participating in SketchDaily on Twitter... The assignment? A leprechaun! I cranked this sketch out to start off my morning.


Sunday, March 16, 2014

Max Viper Concepts

Did some drawing this weekend. Trying to come up with a style for my character Max Viper for my script, Deathworld. What do you think?

Saturday, March 15, 2014

Unity Part VIII: Unity and Parse.com Part 2: The Reckoning

I'm having a lot of difficulty understanding multi-threading in parse.com. I've posted question to Parse's forums and I'll be updating my blog when I get it all figured out.

The main issue I'm having is continuing the execute code after calling an asynchronous command to parse and getting a response. I get this error:

InternalGetGameObject can only be called from the main thread. 
Constructors and field initializers will be executed from the loading thread when loading a scene. 
Don't use this function in the constructor or field initializers, instead move initialization code to the Awake or Start function.

It occurs from doing something that, I think, should be very basic: Hiding my login form after a successful login. Here's the code:

private void ValidLogin(string un, string pw, LoginCallback loginCallback)
{
    Task task = ParseUser.LogInAsync(un, pw).ContinueWith(t =>
    {
        if (t.IsFaulted || t.IsCanceled)
        {
            _LoginErrorMessage = t.Exception.Message;
        }
        Test();
    });
}

private void Test()
{
    if (_LoginErrorMessage == "")
    {
        SetVarsFromParseUser();
        SaveLocalUserData();
        RemoveLoginForm(); // This function causes an error
    }
    else
    {
        PrintFormErrorMessage(_LoginErrorMessage);
    }
}

public void RemoveLoginForm()
{

    LoginUserMenuInstance.gameObject.SetActive(false);
}

Removing "RemoveLoginForm" negates the error, but then my login form would be on the screen... forever!!!

I suspect the error is from trying to execute code for the main thread in a subthread, but I have no idea how to achieve what I want to do otherwise.

This week I also got local save data in. I am basically saving to XML at the moment, but this is insecure, so I'd like to find a better way. At the moment, the user could simply edit the XML to cheat. Nevertheless, I've included my method below.


private void SaveXml()
{
    GameData.username = Username;
    GameData.password = Utility.Md5Sum(Password);   // Custom function for converting to MD5
    XmlSerializer serializer = new XmlSerializer(typeof(GameData));
    FileStream stream = new FileStream(_DataFile, FileMode.Create);
    serializer.Serialize(stream, GameData);
    stream.Close();
}

private bool OpenXml()
{
    Xml = new XmlDocument();
    XmlSerializer serializer = new XmlSerializer(typeof(GameData));
    FileStream stream = new FileStream(_DataFile, FileMode.Open);
    GameData = serializer.Deserialize(stream) as GameData;
    stream.Close();
    return true; // for later in case I decide to do error checking.
}
As you can see, the code requires a custom class for handling XML and I've named mine GameData. I've included it so you can see how it works.
using System.Xml;
using System.Xml.Serialization;
 
[XmlRoot("GameData")]
public class GameData
{
    public string username;
    public string password;
    public int lastLocation;
    public uint goldCoinCount;
    public uint productoTronCount;
    public uint cityLandLotCount;
    public uint beachLandLotCount;
    public uint forestLandLotCount;
    public uint mineLandLotCount;
    public uint storage;    
}
For more info on saving and loading XML for your Unity game, check out this article on Unity's wiki.

Monday, March 10, 2014

Animation Academy Week 2

Had another great session at the Animation Academy Saturday. I'm going to miss my next class to see Book of Mormon, so I did a makeup class this weekend.

After my last blog, I did a few more concepts for the black & white movie monsters inspired characters that I discussed in my last blog.
The Phantom
The Bride of Frankenstein
Little Green Man
The Invisible Man
The Mad Scientist
Skeleton yelling at his kid's Little League coach
Pajama-wearing Devil
I cranked these concepts out really fast, I'm talking around 5 minutes on each. I'm astonished at how fast I can draw with the method Zembillas' showed me.

While in class, I asked what was why the Wolfman's tongue from last week looked so stupid. It was explained to me that the tongue lacked gravity. See how it's arching in the picture? "Like the St. Louis Arch" my instructor said. I redrew the Wolfman, thinking about my dog, Rocco, when I designed it, so it might look a little corgi-ish.

Original Tongue
New Tongue... and a new look!
After drawing it, I was looking at Rocco and noticed that the round part of the snout (where the whiskers are) doesn't go all the way back to the face like I have it. It's more circular or oval shaped where as mine is somewhat rectangular. Looking at my puggle, Zira, who has a shorter snout, the round part is closer to her face, but is still not rectangle. It seems fine considering the volume of the snout, but it wasn't my intention. The whiskers should probably also be closer to the nose too.

My new assignment for week 2 was head rotations. At first I had difficulty with the profile (side) view. Charles gave me a great tip, which, in my own words, was to basically follow the center line on my other drawings to get the head shape. After some reworking, this is the final result of my head rotation on the character I found the most appealing at that time, The Bride.
Front, Front 3/4, Back
Profile, Back 3/4




All and all I'm happy with the rotations. The Back 3/4 has a little bit of a skew on the hair. I'm going to go over that next week with my instructor. I'm also going to see if the profile is right too proportionally. I'm wondering if the eyes and ears are in the right place.

As always, comments and feedback are welcome.

Friday, March 7, 2014

Character Design Class with Charles Zembillas and the Animation Academy

I started classes with The Animation Academy last Tuesday and I'm really happy with the progress I made in one little session. My instructor was Charles Zembillas, who's a character designer and concept artist for many well-known video games and Saturday Morning cartoons. Check out his blog if you get a chance.

The school is located in an office building near downtown Burbank. I went to the evening Character Design 1 class, and there was plenty of parking nearby. Charles was very welcoming, he kept the, conversation entertaining with discussions of Bigfoot, the animation industry, and mythology. There were five other students in the class. The classroom itself had all sorts of neat cartoon art of varying styles and lots of professional animation equipment.

My first class focused on the principle of Dominant Mass and I was to only focus on character heads and keep the character simple (i.e.: cartoony rather than realistic). The principle starts with the different parts of the head having more volume than the rest. The example given used the jaw and cranium and was later expanded on from there. I don't want to give too much away because it's a really good class and one should experience it for oneself.

What I was most happy with was how fast I was able to crank out drawings. The simplicity of the lesson made for some really nice looking characters with minimal effort on my part. This was maybe more of a psychological hurdle to overcome because perhaps I would focus to much on details and minutia rather than shape and composition. Focusing on creating shapes with volume in the right places is quick and easy and once that step is done, it seems like a lot of the composition is done. To the left are my drawings from the classroom lesson. I was told the one on the left wasn't cartoony enough. After that, I forgot that part of the assignment was to not obstruct the character with objects that cover the character (like the hat in the one on the right). Finally, the one on the bottom was one I that made everyone happy.

The homework was to create several more of those compositions and try to make a unifying theme. I started with the theme of a cartoony version of Deathworld characters. Note that all of the following pictures are in the order in which they were drawn to show progress.



After realizing I couldn't really convey the setting and genre of Deathworld using just heads and faces, I decided to switch to Universal monsters as my unifying theme.
Dracula
Frankenstein's Monster


Wolfman

Creature from the Black Lagoon
I was really happy with the way the Creature from the Black Lagoon turned out. It was fun to work with something that had an unusual look and fun exaggerating shapes like the brow and earlobes. The Frankenstein Monster was also fun because I paired a huge head with a small face. Frank was also one of the most simple characters I've drawn in my life. It was neat to see something so simple convey so much character. I was least happy with Wolf-Man. I'm not happy with the way the tongue sticks out. It doesn't look like it's attached to the character enough. It looks like a piece of meat balanced on the dog's lip. I also wasn't able to evoke the idiotic, enthusiastic emotion I wanted in the characters face. That's what's nice about having an instructor though; I can go back and ask what I'm doing wrong. Based on my previous interactions with this instructor, I'm sure the advice will stick too. 

Monday, March 3, 2014

Screenwriting for comic books... Would that be panelwriting?

Recently I've been on a comic book kick. I got nostalgic for the comic titles I collected as a kid and wanted to see what those characters have been up to lately, as well as catch up on stories I missed out on. For the last month or two I've been reading old issues from Marvel and DC every night. One of my favorite comics, which started out as a cartoon series, was Batman Beyond. I always thought it was a little underrated and had a lot more potential to grow. It got me to thinking: I have a great Batman Beyond story, how would I "screenwrite" for a comic book? That's the kind of person I am; always wanting to learn everything about every art that I'm interested in and make one of my own. In fact, I may even make it my life's goal to have at least one successful work of art in film, literature, comics, television, and video games. I should probably try and focus on one success first.

Anyway, this lead me to wonder how comics are made. As a kid, I always noticed that they had writers in the credits of the comics and they were separate from the artists, and I was curious what it took to be a writer for comic books? Do they fill in the blanks for an artist? Do they tell the artist what to draw? How does that all come together since art and writing seem so interdependent art forms that need to be in sync in a comic. Somehow or another I found my way to the book, Understanding Comics: The Invisible Art by Scott McCloud. It appears to be a standard in the industry, someone even wrote a spoof of it. It was easy to get through not only because it's written in comic form, but because it's a fascinating look into the art and philosophy behind comics and even art in general. The author knows so well how comics work and how the reader's brain will react that he'll often tell the reader how he's currently reacting to a previous panel. Very cool. It also made me want to look more into famous art movements. Of course, the book also touched on story-writing as well. There's great art theory about lines and color and why comics choose the styles they use. All in all, great read, highly recommended. 

The next thing I wanted to know was formatting. It appears every company has their own style. They're all pretty similar, but with subtle nuances. If one were going to submit to one of these companies, he should look into their specific format first. For my purposes, I just wanted to see the basic format and how it differs from the screen. I found a great script format example on Dark Horse's website. The PDF in the link has most of the scenarios typical to comics such as how to format for sound-effects, speech, narration, etc. It answers a lot of the questions I had in regard to how much art planning the writer does. Understanding that he's responsible for determining panel content and quantity was really interesting, and in general I really liked this doc because I could see more of the technical process. I'd love to get a chance to check out a comic production company or get any feedback from someone in the industry.

So, this was a fun adventuring into how comics work. I'm still interested in learning more. I start character design classes at the Animation Academy next Tuesday, so as I'm practicing designing characters, I will more than likely want to throw some story in. I'm also really excited to get this Batman Beyond story onto paper, but I have a few writing projects ahead of it, that it's going to have to go on the back-burner. This week, I will be focused on writing for my feature script, DeathWorld, so no updates on my Unity game until the week of the 10th.

Sunday, March 2, 2014

Unity and Parse.com

In my last Unity post, I discussed working with the Facebook API. My thought at the time was that it would be a good way to exchange data between users. While it may be possible to do that with the Facebook API, I don't believe this is its primary purpose and anyway, the Facebook tutorials recommended using Parse.com. So I looked at parse.com and I love it. Here's their description:

The Parse platform provides a complete backend solution for your mobile application. Our goal is to totally eliminate the need for writing server code or maintaining servers. If you're familiar with web frameworks like ASP.NET MVC we've taken many of the same principles and applied them to our platform. In particular, our SDK is ready to use out of the box with minimal configuration on your part. Parse's Unity SDK makes heavy use of a subset of the Task-based Asynchronous Pattern so that your apps remain responsive...

It's very simple to setup and it's free! Well, free to develop on... If you get to a point where you need to hold a bunch of data, then they charge you. It's not going to solve real-time data syncing, instead it offers task based data retrieval. A request needs to be sent with each write and query to the database.

It's so simple that I created registration and login forms for my game after a few hours of coding. My game will be using its online database for backing player's save game as well as facilitate trades between users. I say backup the player's data because the data will only update upon downloading an existing game to a new device, closing the game, and after trade between users. My thought is it'll cut down on traffic. Locally, I'm using XML to save the player's data using C#'s XmlDocument class, which is also really simple to use. My next goal with Parse is to get a many-to-many relationship stored so that players can conduct trades and a one to many relationship for players' inventory. Parse has its own query structure that I haven't worked with yet, but seems pretty straight forward.

Before I get to that, I have to get the rest of the game mechanics worked out. I have resource collection functionality I need to design and implement. I decided on three locations where one can collect resources: Beach, Forest, and Mine (not unlike Happy Street). Each of the three will have three resources a user can collect. A fourth location, City, will be where a player can put those resources to use either by purchasing buildings or crafting new items from simpler ones.

Anyway, lots of stuff yet to be done with regard to this multiplayer aspect, but I wanted to share my experience and give my recommendation for Parse. I did also get through all of the Facebook Unity tutorials and they were pretty straightforward as well. I intended to get back into Facebook to implement promotional features, but as more as a finishing touch.

Sunday, February 23, 2014

My Writing Method v1.85

Why is this version 1.85? Because I'm a neophyte! I love the art of storytelling, but I still have a lot to learn. That doesn't have to stop me from sharing what I've learned! These are steps I rely on when writing. Let's go!
  1. How I Ideate - Ideation is the funnest part for me, I use this method in all of the subsequent steps when I need to get the creative juices going, and so I decided to start with it. So how do I come up with a good idea? I write 25 bad ones. Say I have a scene that involves a hero getting ready to go surf and i need a joke. I go into my word processor; write something like "jokes for scene 2"; push my trusty numbered list icon; think about anything related to the subject of surfing; and write any joke good, bad, or mediocre that comes to my mind without judging it at the moment. In the back of my head, I'll have an idea of which ones are stronger than the other, but I don't worry about that until I've met my joke count of 25. The reason for continuing without looking back is to ignore the bad jokes and the good ones. Ignoring the bad ones prevents me from getting discouraged about myself or frustrated with my writing. Ignoring the good ones prevents me from settling on something when there may be something better if I keep going. Otherwise, it's like going to a restaurant, choosing the first sequential thing on the menu that sounds tasty, and not continuing to read what else the restaurant offers.
  2. Theme - Theme is something I think I'm still trying to fully understand. I tend to think it comes automatically to a story that's interesting. Basically, my understanding of theme is: what is the subject you want to explore? I was tempted to instead explain it as what's the moral to the story? but some of the best stories have no moral, they simply explore ideas and allow us to draw the conclusion. Using one of my favorite movies, Blade Runner, as an example, it explores the moral implications of creating androids, referred to as "replicants," which are almost totally indistinguishable from humans. Blade Runner never really makes a clear judgments on the subject of mankind creating artificial humans... I never walked away from the film thinking "dude, making androids is bad!" even though the replicants are mistreated and multiple humans in the film were attacked by them. Instead, while the film is rightfully critical of slavery, its primarily theme questions what it is that defines our humanity without giving an answer. At least, that's what I took away from it. I wish I could give credit to the person that originally made this point, but some anonymous person pointed out that the androids in the film are more caring for one another than the humans are to their fellow men.

    Comedies seem more forgiving, but they can have themes too! One of my favorite comedies is Anchorman. The film clearly mocks the values of the 1970's, in particular, the struggle of women to be given a fair chance in the workplace. Airplane! is about a guy overcoming his war failures and redeeming himself, even though we don't take his struggle seriously and laugh at his mental anguish. In my series concept, Totally Awesome Dude, I very loosely made the theme the fickleness, foolishness, and irresponsibility of childhood; I thought it'd be fun and fresh to be different from other adult-animated sitcoms with precocious kids such as South Park and The Simpsons. The pilot, Tad Saves the Arcade, maintains that theme with a satire of the cliched "evil businessman trying to shut down our favorite childhood hangout" story. I try to have a theme in mind at least by the time I get to the Treatment phase.

    For a serious dramatic film or short story, I would have the theme in mind in the structure phase; hence, theme is #2 on my list between the those two subjects.
  3. Structure - Different mediums have different act structure and there's even different structures within the same medium (for example, a serialized drama differs from an episodic drama). All stories have a beginning middle end, but the middle can be divided into multiple acts. Made-for-TV movies have many more acts than a feature film because producers want to give viewers a reason to stay tuned in through commercial breaks for 2 hours. A sitcom seem to have 4 acts for one primary storyline, or 3 acts for stories that involve multiple characters (Friends is a good example of the latter). I have not seen more than 3 simultaneous storylines in a sitcom, more often I see two. I notice Friends also tends to finalize one of the less important storylines during the ending credits, which I assume is how they cram so much into one episode.

    Keeping structure because it helps me to find out what I need to fill in the blanks when I get to the treatment phase. So, for example, I'm writing a 22 minute sitcom with 4 acts. Act 1 starts and ends before the first commercial break, Act 2 starts and ends before the second commercial break, act 3 and 4 occur in the last segment of the show. Again, using my example script, Tad Saves the Arcade, as an example (mostly because it's already completed, registered and copyrighted, and been pitched), my structure would be an outline like this:    

    Act 1 - Tad's favorite arcade located within the local pizza place is going to go out of business unless the owner pays the rent.
    [Commercial]
    Act 2 - Tad tries to raise money for the restaurant by doing odd jobs and asking friends for help. He not only fails, but he and his brother accidentally launches a missile at the restaurant.
    [Commercial]
    Act 3 - Tad and friends stop the missile. His friends, thankful of the odd jobs he did earlier, generously grant him the money to help save the restaurant .
    Act 4 - Realizing he can just buy his own arcade machines with all the money he was given, he selfishly lets the pizza shop go out of business.

    Ideation here came from considering funny setup plots as well as "how can I make it more difficult in act 3?" I probably had some other ideas, (I think one with the restaurant owner having a comical heroin overdose), but for whatever reason at the time, I thought the missile plot had the most potential. Missiles are cool. They did it though computer hacking which is also cool. Ideation for Act 4 was deciding whether or not the protagonist will prevail or fail and figuring out how.

    When I first considered structure, I wondered why stories are structured in such a way that the conclusion is shorter than everything else rather than symmetrical.  If I had to guess, I think it's because humans are most interested in the struggle when it comes to storytelling; act 2 and 3 are the the conflict where where we get from the problem to solution. Act 1 is the second longest part because the struggle needs a proper and plausible introduction as to why our protagonist is struggling, and what the stakes are if he fails. Act 4 is the shortest because it terminates the most interesting part, the conflict.
  4. Treatment - A Treatment is different from a series treatment/mini-bible. What I'm referring to is a sheet that plots out each scene and what's to be accomplished. Treatment bridges the gap between structure and writing converging into a map for my characters. If I don't have a solid treatment in mind when I start writing scenes, I tend to write irrelevant scenes or worse, go on a tangent! My characters literally go to locations they're not supposed to and get lost in my imaginary world!

    Ideation here comes in me trying to fill in the acts with scenes and plot point. I write down every idea I have even if it's inconsistent with a previous one (again, maybe I'll find something better if I go a different direction). After I have a huge list of ideas for scenes, I duplicate my act structure list and pull stuff into that new structure list from the scene list to keep things clean without erasing my old ideas.

    This ideation list is fluid; as I come up with one idea, I'll ideate more based on that idea (even though I may never use either). I'm constantly going between acts when I realize something would make a good ending or middle and try to think of a way to set it up in a previous act. The purpose for me is to get my mind firing up its neural pathways. One idea opens up multiple related ideas because of an associated memory or thought, and it just exponentially grows.

    In Act 1, I'm looking at the headings and wondering things like "why is the pizza place shutting down?", "what's the place like?" "how can I show that it's Tad's favorite place"? I also look ahead to act 2 knowing Act 1 has to set it up so I think "why would anyone help Tad?"

    Act 2 has me wondering what would Tad try to save the pizza place. What works, what sets him back and what finally sets up Act 3, things getting worse with the missile. Why does his brother get involved?

    Act 3, I'm wondering how can I resolve these two problems.

    Act 4, Simple: epilogue and conclusion. It's a comedy, so i try to end it on a funny note. This act is so short it's really only one gag over two scenes: Tad receives the money, Tad spends the money.
    1. Act 1 - Tad's favorite arcade is apart of the local pizza place, which he discovers is going to go out of business unless the owner pays the rent to a greedy landlord.
      1. The landlord is in the Illuminati conspiracy and needs the place to perform occult rituals
      2. The landlord's wife is a gold digger and needs new boobs
      3. The tenant is a drug addict and spent all his money on speedballs
      4. Aliens came and attacked the pizza place
      5. Two gangsters from the 1920's traveled through time to rob this one store and create and inter-dimensional protection racket.
      6. The arcade has animtronic animal puppets like Chuck-E-Cheese, but they're really terminator robots in disguise searching for Sarah Conner. 
      7. The arcade has funny games:
        1. A spoof of the ridiculously violent and propagandist game, NARC.
        2. Kid Oedipus 
        3. etc. all the way up to 25.
      8. Jokes about those ball pits at restaurant playgrounds
        1. It's endless and goes to Atlantis
        2. there's a bunch of hypodermic needles in it.
        3. There's a shark in it
        4. etc.
      9. Etc. all the way to 25 whatever...
    2.  Act 2 - Tad tries to raise money for the restaurant by doing odd jobs and asking friends for help. He not only fails, but he and his brother accidentally launches a missile at the restaurant. 
      1. What does Tad try that doesn't work?
        1. Sells candy bars
        2. Trys to get the city to bailout the pizza place
        3. etc. to 25
      2. How does the missile get launched?
        1. They were going to steal the money from the government, but they accidentally hacked the DOD rather than the treasury.
        2. Tad threatens the president to pay for the pizza restaurant or he'll be a terrorist, and the president instead launches a strike on the pizza place.
      3. Why does Johnny get involved with Tad resulting in the missile launch?
        1. Johnny is a genius and conceited. Tad plays to this and eggs Johnny on to hack the computers betting he can't do it.
        2. Johnny just demonstrates how to do it, but Tad actually does it. 
    3. Act 3 - Tad and friends stop the missile. His friends, thankful of the odd jobs he did earlier, generously grant him the money to help save the restaurant. 
      1. How do they stop the missile?
        1. They enlist the help of the resident explosive expert, Ricky to blow it up
        2. They call the pentegon and ask to borrow a jet
        3. They rewind history and recall the missile in reverse. 
        4. etc. to 25
      2. etc. to 25
    4. Act 4 - Realizing he can just buy his own arcade machines with all the money he was given, he selfishly lets the pizza shop go out of business. 
      1. Tad gets the money in a big ceremony. What's the scene like?
        1. Everyone gathers around to witness Tad handing over a giant check to save the shop.
        2. etc. to 25
      2. Tad spends the money on arcade games.
        1. People that helped him are mad that he lied to them about saving the arcade.
        2. The pizza store owner is homeless
        3. etc. to 25
      3. etc. to 25
  5. Writing the "Shit Draft" - An early professional screenwriting mentor of mine explained the "Shit Draft" to me. It was essentially explained to me something like "no matter how good of a writer you are, your first draft is going to to be shit. The best thing you can do is get it out as fast as you can because rewriting is going to be the most tedious step and the purpose of it is to make your draft not be shit." Not wanting to write something that sucks is instinctive to me. Maybe I subconsciously worry someone will see it, or I'll get discouraged that I don't have a natural talent be a writer. I got over this by just forcing myself to complete screenplays and seeing how much the story improves from the first draft. I force myself by just writing out scenes I liked using the outlines in the the finalized (widdled down) version of the treatment outline that I settled on in the previous step. I challenge myself to get it done as fast as I can.

    I also force myself to overwrite. In my treatment ideation phase, I will usually find more than one way to write progress the story. I'll find multiple gags that are really funny in concept, but I will only have room for one. Without seeing these things written out, I can't tell if the flow of the scene or the joke will work. It may be that I have a really funny concept, but I'm unable to execute it. I may have a concept that seems to be not as funny as others, but ends up working really well. The point is, anything that seems worth exploring in my treatment, I write out because I can always cut it later. It would be more difficult for me to add missing parts than cut unnecessary parts. 
  6. Rewriting and Rereading - The most tedious part for me, but also an unavoidable part. It also doesn't help that I'm my most harshest critic. To help me progress through the tedium, I look for the things in the list below, and when I've amassed enough of them, I rewrite. I reread after I rewrite looking for them again, and repeat this process until I'm happy.
    1. Cutting - When I'm looking for scenes to remove for time, I look for scenes that don't advance the story or characters. There's always exceptions to any rule in art, and a major exception here is something memorable or entertaining such as a great gag for a comedy or the cool factor for an action movie.
    2. Pacing - Here, I look to see if the story or characters are constantly progressing and that I'm giving the audience what they want. If I'm writing an action movie, I want to keep the action going as much as possible. If I'm writing a comedy, I want a be a gag to be present in certain intervals (I shoot for at least 1 gag per page). To figure out pace, I read my script and for the most part it's instinct. If there are parts where I feel like I'm slightly losing interest, I figure the audience will have a greater negative reaction since it's not as personal to them. There's also page counts to consider. Again, I don't want to be bound by rules, but industry standards like "Act 1 should be X number of pages" is at least a good rule of thumb. 
    3. Unnatural Dialog - I read dialog aloud. I'm looking to see if it flows off the tongue clearly; if it's easily comprehensible; and to see if it's something the character,with its unique personality would really say. In my first animated pilot I produced, I did the voice acting and want to change multiple lines while recording because they didn't sound right when spoken. I would constantly rewrite it right there in the sound booth. This is an okay approach for something I'm doing on my own, but what if I have to give these lines to an actor? Shouldn't I be happy with the line before I ask someone else to pour their artistic talents (and reputation as an actor) into speaking it? It also isn't an efficient way to work if I'm figuring out a clever way to change the dialog while an audio engineer is being paid to just wait to record it.
    4. Preachy - I'm strongly libertarian and somewhat of a deist. When looking for themes I do pour my politics and philosophy into my work. Like Orwell said, I think all works of art are political. I tend to go overboard and watch to cut back when it's not entertaining.
    5. Inside Gags/Esoteric plots - I have a tendency to want to make really obscure jokes without concern if someone else will get them. For the most part that's okay, unless they're too obscure. My attitude used to be "I'm making this art to express myself, not be popular", which is a good one to have, but it goes too far if I'm making something where I'm the only person on Earth that would understand and appreciate. If I were aiming for that, I would be happy just keeping journals and painting pictures for the rooms in my home.
    6. Saying rather than showing/Saying rather than implying - This is a common rule of thumb. I think it's because audiences likes to infer stuff out on their own. I think it's human nature to enjoy discovering things on our own rather than having them figured out for us. So, I try to avoid filling in more detail than necessary in hopes the audience will say "why did he...? oh yeah I just remembered..." It's also valuable in visual mediums because... They're visual. It conveys the information more vividly and sometimes faster. 
    7. Acting without explanation - This sounds almost converse to the last rule and almost related enough to #3 that they could be put together, but I'd like to make it separate. Recently, I had a tough, but good-hearted character named Max in a scene where he is totally belligerent to another guy, Priest, almost immediately after they just met. Max was also on Priest's property and technically trespassing. It was out of character and didn't make sense for Max. The thought hadn't occurred to me when I wrote it because I was so focused on getting Max and Priest into the next necessary scene where Max is recovering from being beaten by Priest.
    8. Inconsistencies, useless characters, continuity errors, etc. -These are things that take the audience out of your universe and put them back in the theater making them conscious of the fact that they're watching, rather than experiencing. They should be obvious, so I'll be brief. Inconsistencies are plot points that counter another plot point (e.g.: a super rich guy in one scene struggling to make a ends meet in another with no rationale in between). Useless characters are characters that don't add anything to the story, don't interact significantly with the protagonists, or maybe a character that is very similar to another character to the point where they can be combined into one without a problem,. Continuity errors are things like a scene where a family is having dinner one moment, then they're described as having breakfast in the next. 
    9. Proof reading - I try to proofread myself before I ask someone else. It's inconsiderate to have someone else catch a mistake I could've seen if I just read my work. In order not to forget the errors, I print my whole draft and mark it with a colored pen. I learned not to proof read in front of my computer because I will endlessly make tiny trivial adjustments.

      After that, I have my friends and family read my work. It's human nature that my brain will trick me into thinking a word exists or doesn't exist on a page after reading rewriting a script over and over. Having a free third party such as a friend of family member read it helps alleviate this.

      After that, I hire professional proofreaders. I want to present the best possible work I can to studios that review several scripts per week. The last thing I want is to look unprofessional. I consider myself fairly good with grammar, but concede that I would never make it as a professional proofreader, nor do I want that career, so why not just hire one? They're not that expensive either. There are companies online that charge a small fee per word count and I can start and finish the process with them without having to leave my desk. 
    10. Feeback - It's invaluable getting feedback about the actual story from friends, professional script readers, and screenwriters. For the same reason as proof-reading yourself first, get the script as good as you can get it yourself before you ask for someone else's advice. I've only used script readers that have credits or have relevant industry experience. I ask about any parts they didn't get and any parts they thought were boring. I decided to get at least 3 professional readers to look at my stuff if I'm going to try to sell it or put it in a competition. The reason for this is that I've often had one script reader tell me he didn't like a part of a story, while another say it was his absolute favorite part. Obviously, this stuff is subjective and I figure if I get a mixed reaction then I can just rely on my gut at that point.

      Professionals also helped me typographically format my script to conform to industry standards. For example, early in my writing, I was putting "CUT TO:" transitions before every scene and my script was way too long. I learned that this is unnecessary and taking it out reduced the page count significantly. There are many other writing no-no's I learned that I help make me look like less of an amateur in the eyes of producers and agents. 
I'd love any feedback and comments on any improvement or if you want to share your own tips about your own methods. 

Friday, February 21, 2014

C# Stuff and Screenwriting

I neglected to mention a couple of things going on in my last blog.

First, learning C# has been a breeze so far, but I did want to point out a couple of cool things I discovered today while looking at Facebook's unity code. The first is the sealed keyword. This is a keyword that prevents inheritance or overriding. It's like final in Java and AS3. Nothing too special, just thought it was interesting... Come to think of it, it's not interesting, just unusual for me that it's different from "final" and I wanted to note it. The second, actually interesting keyword is #region and #endregion.  These are keywords used in Visual Studio to let the IDE know that you want to make a section of code expand or contract for ease of hiding and showing. It makes it easier to read too. You can title the region with notes!

Also, since I had some downtime waiting for GoDaddy to help me, I worked on a feature-length screenplay for a project I'm tentatively calling Death World. I say tentatively because I really like the name because it sounds like a post-apocalyptic B-Movie. The only problem is that there's a series of books called Death World, which have nothing to do with my feature. I can't talk too much about it because I don't want to give too much away, but I am really happy with the gags and the story flow. I've been devoting too much of this blog so far to programming, so in the coming days I intend to go over the methods of story and joke ideation that I picked up over the years, the obstacles writers have to overcome, and anything else that comes to mind about the art of story telling not just for film, but other mediums.

Thursday, February 20, 2014

Unity Part 6 starring and produced by Bill Cosby.

Actually, I didn't get much input from Bill Cosby on this. I did, however, go through the tutorial on working with the Facebook Unity API from Facebook's Tutorial. It worked perfectly locally, but there were some pitfalls I encountered and mistakes I made along the way.


  1. You'll notice in step 2 of the Configure your app for Facebook Canvas section that Facebook apps require HTTPS hosting of the .unity3d file. I have no experience with security certificates on websites, so I figured this was the time to learn. I thought perhaps there may be a way to do this locally, but I don't have a lot of experience with it and an SSL certificate was only $60 with Godaddy. If anyone has any info on another (free) way to do this, please leave a comment! I tried using self-signed certificates and a local webserver and couldn't get it to work.

    My dedicated server through GoDaddy has a Plesk administrator control installed. I followed GoDaddy's instructions for installing to Plesk 8.x to a tee except that, unlike the direction in Step 11, there was no option to change the domain's certificate from the default one. After much searching, which ,long story short, was difficult since I didn't know what to search for, I discovered that I had to switch the certificate in the IP addresses section in the server configuration. I'm glad I discovered this on my own because GoDaddy would've charged me to get them to help me configure the server even though their instructions seem to be incorrect. Lame!
  2. I notice the Facebook tutorial makes no mention of setting the Site URL setting in the Website section of the app settings. I tried leaving this out just to see if the app would work without it and I couldn't save the settings. So, this field should be the URL for the html file that unity spits out when you build to web player. 
  3. So, in my first build I somehow neglected to put the App Id discussed in Step 6 in and without it, it's impossible to log in. Facebook doesn't really help explain because if you do this, you'll just get an alert error that says "An error occurred. Please try again later." over and over. Be sure to make sure your app Id is right before you upload to your server. For some reason when I uploaded the correct build, it wouldn't show the updated Id. I even deleted the files from the server and reuploaded them and it still showed the 0 default Id. I ended up making a new directory and having Facebook read from it instead. Again, any info as to why my server would serve up an old page (besides caching because I'm pretty sure that wasn't it) please leave a comment. 
That's it! Seemed like a lot I guess because it took me a long time to get 1 and 3 straightened out with my server. My console is working just like in the picture. When I view the app on Facebook, it shows all my friends dialog, status post dialog and so forth. Really neat stuff. My next goal is to send game data from one friend to another. 

Thursday, February 6, 2014

Unity Part V: Return of the NGUI

I wanted to put a scroll pane in my game. Following the tutorials on the NGUI site and manually making empty GameObjects and adding the appropriate scripts didn't work at all! I had no idea what I was doing wrong. I even used the example scroll pane scene and just copied it into my project and it didn't work either! The items in the scroll pane wouldn't render. I couldn't figure it out! I copied all of the settings exactly. Finally, I used the NGUI create panel and it just magically worked. I have no idea what I was doing wrong originally, but I'll make it a point not to add scroll panes without using the menu regardless. My next step? The trade menu. I'm going to be using Facebook to connect players. More on this in my next blog.

Wednesday, February 5, 2014

Unity 2D IV: The Reckoning of the UIs

I tentatively finished up (is that an oxymoron?) my UIs last night. I need to create assets for the other the Trade and Build aspects of the game, so I'm moving on to that today. I created an abstract class for all of my UI menus to extend from that adds some tween scaling on a specified 2D axis.

using UnityEngine;
using System.Collections;

public abstract class AbstractUi : MonoBehaviour {
    private TweenScale SubMenuTween;
    private GameObject LastMenu;
    private Vector3 OriginalScale;
    public enum Axis { X, Y, Z };
    private float TweenDuration = 0.2f;

    protected void Start()
    {
        
    }

    protected void openSubMenu(GameObject subMenu, Axis scaleAxis)
    {
        subMenu.SetActive(true);
        Vector2 finalScale = new Vector3(subMenu.transform.localScale.x, subMenu.transform.localScale.y, 1);
        switch (scaleAxis)
        {
            case Axis.X:
                subMenu.transform.localScale = new Vector3(0, subMenu.transform.localScale.y, subMenu.transform.localScale.z);
                break;
            case Axis.Y:
                subMenu.transform.localScale = new Vector3(subMenu.transform.localScale.x, 0, subMenu.transform.localScale.z);
                break;
            default:
                subMenu.transform.localScale = new Vector3(subMenu.transform.localScale.x, 0, subMenu.transform.localScale.z);
                break;
        }

        SubMenuTween = TweenScale.Begin(subMenu, TweenDuration, new Vector3(finalScale.x, finalScale.y));
        SubMenuTween.method = UITweener.Method.BounceIn;
    }

    protected void closeMenu(GameObject subMenu, float scaleX, float scaleY)
    {
        if (LastMenu == null)   // prevents multiple calls to close window while one is still animating. 
        {
            OriginalScale = new Vector3(subMenu.transform.localScale.x, subMenu.transform.localScale.y, 1);
            TweenScale.Begin(subMenu, TweenDuration, new Vector3(scaleX, scaleY));
            SubMenuTween.eventReceiver = gameObject;
            SubMenuTween.method = UITweener.Method.EaseIn;
            SubMenuTween.callWhenFinished = "onSubMenuTweenClose";
            LastMenu = subMenu;
        }
    }

    public void onSubMenuTweenClose()
    {
        LastMenu.SetActive(false);
        LastMenu.transform.localScale = OriginalScale;
        LastMenu = null;
    }

    

}
using UnityEngine;
using System.Collections;

public class HeadsUpUi : AbstractUi {
    public GameObject MenuUi;
    
    private TweenScale MainMenuTweenScale;
 // Use this for initialization
 void Start () {
        MenuUi.SetActive(false);
        
 }
 
 // Update is called once per frame
 void Update () {
 
 }

    public void OnMenuButtonClick()
    {
        if (!MenuUi.activeSelf)
            openSubMenu(MenuUi, Axis.Y);
        else
            closeMenu(MenuUi, MenuUi.transform.localScale.x, 0);

    }
}
using UnityEngine;
using System.Collections;

public class MenuUi : AbstractUi {

 // Use this for initialization
    public GameObject TravelUi;
    public GameObject BuildUi;
    public GameObject TradeUi;

 void Start () 
    {
        HideSubMenus();
 }

    private void HideSubMenus()
    {
        TravelUi.SetActive(false);
        //BuildUi.SetActive(false);
        //TradeUi.SetActive(false);
        
    }
 
 // Update is called once per frame
 void Update () 
    {
 
 }

    public void OnTravelClick()
    {
        HideSubMenus();
        TravelUi.SetActive(true);
        openSubMenu(TravelUi, Axis.X);
    }

    public void OnBuildClick()
    {
        HideSubMenus();
        //openSubMenu(BuildUi, Axis.X);
    }

    public void OnTradeClick()
    {
        HideSubMenus();
        //openSubMenu(TradeUi, Axis.X);
    }

    public void OnSubMenuItemChosen()
    {
        HideSubMenus();
        gameObject.SetActive(false);
    }

}
Ngui has click events built into buttons, so in my editor, all I had to do was assign things like OnTradeClick to the Trade button, OnBuildClick to the Build button, and so on. The UI needs some aesthetic refinement, but for now it's functional and I need to move on to asset creation to do the rest. Good bye UI programming... I shall return!!!

Monday, February 3, 2014

Unity Part III: The Anchoring

I played around with NGUI some more and I think I'm getting my head wrapped around anchoring. I got my HeadsUp menu looking fly by putting 0 in on the left and right anchor points to the UIRoot and put a higher res image whose width matched my phone's resolution's landscape width. This got it to stretch across the screen without looking lame. The next part was the dropdown menu from the HeadsUp. I did not want that one to scale, I wanted it to align on the right side of a button labeled "Menu" that is on the right side of my HeadsUp menu, as well as a fixed distance down from it. To achieve this, I created a Unified anchor on the MenuUi, set the target of the MenuUi to be the Menu-Button, then set the left and right anchor to the "Target's Right" because I always want MenuUi to be the same distance from the right edge of Menu-Button no mater how it moves or shifts around in its own anchoring system (although the Menu-Button is also a fixed distance from the right edge). The bottom and top portion of the anchor should be inconsequential since I have heights on my menu fixed, but nevertheless, I positioned them relative to the bottom.



At this point, if I adjust the Left number higher or lower it'll scale the MenuUi narrower and wider respectively because its points get closer or further from the right side. If I adjust the Right number higher or lower, it'll scale the MenuUi wider and narrower because it's getting further or closer to the right side. Maybe that's a lousy way to describe it... They're really just points that you're moving, and if you are having difficulty wrapping your head around it, take a look at the yellow lines Unity adds in the image below.

Does that help? I hope so. The blue dots show where the anchors are, the yellow dots are the target's edges. One thing to keep in mind is that changing one anchor without changing its opposite anchor will cause scaling, so I've been adjusting both together by the same amount when I don't want things to scale. To reset to my sprite's dimensions so it's not scaled, I remove the anchor and use the Snap button on the widget's dimensions drop down.